AWaterproof connectors typically use gaskets, 0-rings, or molded seals to create a barrier against water and dust. The materials used are often designed to withstand exposure to UV light extreme temperatures, and various chemical. The number of connection points,the design of the locking mechanism, and the materials chosen all contribute to the connector's ability to resist environmental factors
AThe pin size is the outer diameter of the connector and its inner diameter. The outer diameter is 5.5mm while the inner diameter is 2.5mm. To find out the exact connector size, measure the center pin and the inner diameter of the port. Then, compare the sizes to determine which type of adapter you need to buy.
AMost waterproof connectors are rated either IP67 or IP68, which means they are dust-tight and protected against 30 minutes of submersion in water at either 1 m or 1.5 m, respectively.
AThe P20 waterproof connector shell is made of PA66 nylon, the seal is silicone, and the contact is copper alloy.
AE-Weichat Industrial Connector has four wiring methods: welding, wire locking, riveting, and snap fasteners.
目前在第1页, 共有1页, 共有1条记录 第一页 上一页 123 下一页 最后一页 跳转到
Need a technical consultant to answer your questions?