Connector FAQ

QHow do I choose a suitable Waterproof Data Connector?

AThe first step in selecting a waterproof connector is understanding Ingress Protection (IP) ratings. These ratings indicate the connector's resistance to dust and moisture. A higher IP rating signifies greater protection.

QHow do I know my Electrical Waterproof Connector size?

AThe pin size is the outer diameter of the connector and its inner diameter. The outer diameter is 5.5mm while the inner diameter is 2.5mm. To find out the exact connector size, measure the center pin and the inner diameter of the port. Then, compare the sizes to determine which type of adapter you need to buy.

QWhat is the rating of a Industrial Waterproof Connector?

AMost waterproof connectors are rated either IP67 or IP68, which means they are dust-tight and protected against 30 minutes of submersion in water at either 1 m or 1.5 m, respectively.

QHow to Waterproof Outdoor Plug Connector connections?

ADrill holes at each end, big enough for your cords but not wide enough to let rain sneak in. Use a utility knife to widen the holes where needed. Now, simply insert the plugs, snap on the lid, and voila! Your connections are shielded from the downpours.

QHow do you protect Outdoor Electrical Connectors from water?

AIncorporating gaskets into electrical connector covers is a strategic method to ensure a watertight seal, which is crucial for preventing water damage. Gaskets, typically made from silicone, rubber, or foam, fill the space between two surfaces, thereby preventing leakage.